This is a Swift binding for MuJoCo physics simulation library.
Up until now, I only dipped a bit into DRL with https://github.com/liuliu/s4nnc/tree/main/examples. OpenAI Gym is OK for these simple mechanisms and I don't mind to wait a few minutes more. But most recently, I grown interests in more serious use of DRL / PPO under Sim2Real banner. For these, it is popular to either use Isaac Gym or exploiting multi-core for environment runs. For later, doing it with
multiprocess package of Python is awkward but the preferred way.
If we can run MuJoCo from Swift, we can avoid the trip into Python entirely and simply use
DispatchQueue.concurrentPerform for environment runs.
MuJoCo for Swift can be installed through either Swift Package Manager or Bazel.
You can add MuJoCo for Swift in your project from here:
.package(name: "MuJoCo", url: "https://github.com/liuliu/swift-mujoco.git", from: "2.3.0")
You can simply add MuJoCo for Swift as a dependency in
git_repository( name = "swift-mujoco", commit = "3dfc5a10f3d09f96432efc7804b0aedfa866d0e3", remote = "https://github.com/liuliu/swift-mujoco.git", shallow_since = "1667838646 -0500" ) load("@swift-mujoco//:deps.bzl", "swift_mujoco_deps") swift_mujoco_deps()
MuJoCo for Swift should work on macOS, Linux and iOS. The
GLContext is only available on macOS and Linux.
A mixed strategy was used for MuJoCo interface generation. MuJoCo's API heavily leans towards exposed public C structs. MuJoCo for Swift has to expose these C structs. Wrappers for these C structs are manually created with following principles:
typealiasto its C struct;
public structwith C struct interior, keeping the memory layout exactly the same (can better expose certain properties, more on that later);
mj_deleteXXXmethods. These are
public structwith a
final class Storageinterior to track lifetime.
Which out of the three implemented was tracked in
Sources/codegen/functionExtension.swift. We later generated
Sources/MjObject+Extensions.swift to encode above strategies into Swift protocol. All
MjStruct conforms to this protocol which provides associated type of the underlying C struct, as well as the memory access method
MuJoCo's C headers are parsed and used to generate properties on structs and functions on structs. These are
XX+Functions.swift files. All accessors are generated for public C structs from MuJoCo.
They can be reproduced with:
bazel run Sources:codegen -- ~/workspace/swift-mujoco/Sources/ ~/workspace/mujoco/include/mujoco/*.h
Extra care was taken to make sure comments are properly parsed and added to these extensions. https://liuliu.github.io/swift-mujoco is the documentation generated based on these comments.
MjArray<T> is the array type that exposes static or dynamic arrays within a C struct. It retains the underlying storage to make sure the access is safe. It also conforms to set of protocols such that for
inout parameters and other array parameters, you can either pass vanilla array or
MjTuple, through .tuple()) and expect it just works.
enum are parsed and generated in
Mjt.swift file. Because there is no type annotation, we do our best to infer which int type are enums from comment.
MjtPertBit are special handled to be
C functions are not scoped to a particular object. We have to infer these. First, we try to infer which group of APIs it belongs to with the prefix:
mjvXX structs. We prefer the first parameter, otherwise the last parameter (as it is often used as write to). If no suitable object to be found, it is a free function.
The interface generation process also treats
const annotation seriously. Without
const, these methods are annotated with
mutating. If the parameter is a pointer without
const, it is annotated with
Not all functions are automatically generated, some of these are manually implemented because:
mj_loadXMLcan be better translated with
Whenever possible, we lean towards automatic interface generation. That's why we kept certain APIs in a way that look weird.
MjUI has many quirks that at odds with this philosophy. In particular,
MjuiDef automatically associated the UI control with the underlying storage
pdata is a pointer, it has no regards to the underlying storage lifetime. A set of property wrappers:
MjuiDefStateMap are introduced to solve this issue. Although users are still responsible to make sure the underlying storage lifetime longer than
MjUI itself, you don't need to deal with raw
MjuiDefObjectMapper is introduced to facilitate direct mapping between an
MjStruct and a
MjuiDef. You need to pay extra attention because there is no guarantee on underlying
MjStruct lifetime with
MjuiDefObjectMapper. A recommended way is to group them both under a
final class to make sure their lifetime is in sync.
Only constants related to
MjUI are ported over so far.
Callbacks can be found under
Mjcb. These are manually ported callbacks but does support Swift closures (i.e. captures).
CustomReflectable protocol conformance is implemented for MjStruct. These should contain all the fields in C structs with very few exceptions (
MuJoCo leans heavily on static allocated strings. To make interaction easier, these are exposed as ordinary Swift strings. The back-and-forth copying can be expensive. Because static allocated strings have hard limit, there is a silent truncation if such limit reached.
GLContext object is introduced to delegate GLFW interactions. Functionalities from
./sample/ of MuJoCo were added to make interactions with
MjUI easier. This object is a bit overreaching as it provides access to clipboard, timing and drag & drop functions.
Examples/ant should provide good starting points to learn about the APIs. To run:
bazel run Examples:ant bazel run --compilation_mode=opt Examples:simulate -- ~/workspace/swift-mujoco/Examples/assets/ant.xml
Visit documentation at: https://liuliu.github.io/swift-mujoco. These should be kept up-to-date with
mj_defaultVFS mj_addFileVFS mj_makeEmptyFileVFS mj_findFileVFS mj_deleteFileVFS mj_deleteVFS mj_loadXML mj_defaultLROpt mj_defaultSolRefImp mj_defaultOption mj_defaultVisual mj_loadModel mj_deleteModel mj_makeData mj_deleteData mjv_defaultCamera mjv_defaultPerturb mjv_defaultOption mjv_defaultFigure mjv_defaultScene mjv_updateScene mjv_freeScene mjr_defaultContext mjr_freeContext mjui_themeSpacing mjui_themeColor mjui_add mjui_addToSection mjui_event mjr_readPixels mjr_drawPixels mj_setLengthRange mjr_findRect mj_copyModel mj_saveModel mj_sizeModel mj_copyData mj_stackAlloc mj_saveLastXML mj_freeLastXML mj_printSchema mj_step mj_step1 mj_step2 mj_forward mj_inverse mj_forwardSkip mj_inverseSkip mj_resetData mj_resetDataDebug mj_resetDataKeyframe mj_setConst mj_printFormattedModel mj_printModel mj_printFormattedData mj_printData mju_printMat mju_printMatSparse mj_fwdPosition mj_fwdVelocity mj_fwdActuation mj_fwdAcceleration mj_fwdConstraint mj_Euler mj_RungeKutta mj_invPosition mj_invVelocity mj_invConstraint mj_compareFwdInv mj_sensorPos mj_sensorVel mj_sensorAcc mj_energyPos mj_energyVel mj_checkPos mj_checkVel mj_checkAcc mj_kinematics mj_comPos mj_camlight mj_tendon mj_transmission mj_crb mj_factorM mj_solveM mj_solveM2 mj_comVel mj_passive mj_subtreeVel mj_rne mj_rnePostConstraint mj_collision mj_makeConstraint mj_projectConstraint mj_referenceConstraint mj_constraintUpdate mj_addContact mj_isPyramidal mj_isSparse mj_isDual mj_mulJacVec mj_mulJacTVec mj_jac mj_jacBody mj_jacBodyCom mj_jacGeom mj_jacSite mj_jacPointAxis mj_name2id mj_id2name mj_fullM mj_mulM mj_mulM2 mj_addM mj_applyFT mj_objectVelocity mj_objectAcceleration mj_contactForce mj_differentiatePos mj_integratePos mj_normalizeQuat mj_local2Global mj_getTotalmass mj_setTotalmass mj_version mj_versionString mj_ray mj_rayHfield mj_rayMesh mjd_transitionFD mju_rayGeom mju_raySkin mjv_room2model mjv_model2room mjv_cameraInModel mjv_cameraInRoom mjv_frustumHeight mjv_alignToCamera mjv_moveCamera mjv_movePerturb mjv_moveModel mjv_initPerturb mjv_applyPerturbPose mjv_applyPerturbForce mjv_averageCamera mjv_select mjv_initGeom mjv_makeConnector mjv_makeScene mjv_addGeoms mjv_makeLights mjv_updateCamera mjv_updateSkin mjr_makeContext mjr_changeFont mjr_addAux mjr_uploadTexture mjr_uploadMesh mjr_uploadHField mjr_restoreBuffer mjr_setBuffer mjr_blitBuffer mjr_setAux mjr_blitAux mjr_text mjr_overlay mjr_maxViewport mjr_rectangle mjr_label mjr_figure mjr_render mjui_resize mjui_update mjui_render mju_error mju_error_i mju_error_s mju_warning mju_warning_i mju_warning_s mju_clearHandlers mj_warning mju_writeLog mju_type2Str mju_warningText
|Last commit: 2 weeks ago|
Mirrors https://github.com/deepmind/mujoco/releases/tag/2.3.0 release. Plugin API is not enabled (as I am learning it).